Saturday, September 6, 2008

First hull half


After some bubble troubles with normal laminating, i decided to use vacuum for the hull. I first put the additional layer on the deck flange. I made it higher then required, so that i could use it to put the sealing tape. The mold was not everywhere high enaugh, thats why you see all the clamps pressing the things together, to get it airtight. Next time i will use a higher mold plate.


Vacuum the stringer.


The hull out of the mold.

Starting laminating


After my gliding vacation (using an other hightech toy) i got the laminating materials delivered


The hull ready for laminating


Patterns for the bulkheads


Bulkhead sheet under vacuum. I didn't want to spent the time drilling holes in the foam. So i did each side seperatly


The vacuum pump. After i first try with a small pump, i changed it to this model.


The band saw with a knife band (no teeth). I cuts the laminated bulkheads very well.

Wednesday, July 2, 2008

Planking


I am using Airex foam (it is produced near my place). I bent the strips with the help of a heatgun and fix them with particle board screws. I will use the dremel method to make slots for the glue.

Battens


After a long search for a good batten material, i found a hint in an other blog and used MDF.
I got the sheet cuted to 100mm stripes in the shop and cut them myself to 23 mm. I have now plenty of sawdust, maybe i can use it as a filler. Then i glued them together for the full lenght. I am very happy with this solution, because MDF is much cheaper then wood battens and the a totally uniform.

F22 build in switzerland


After 1 year search, i finally found a workshop near my place.